Lithium Battery Charger Board With Protection Module

• Current- 1A adjustable.
• Charge precision- 1.5%.
• Input voltage- 4.5V-5.5V.
• Full charge voltage- 4.2V
  
• Led indicator- red is charging Green is full charged.
• Input interface- micro USB.
• Work temperature- -10℃ to +85℃.
• Inversed polarity- NO.
• Size- small to 25X19X10mm.

Specification:

    Charge Controller: TP4056
    Protection IC: DW01A or DW01P
    Charge Method: Constant-Current/Constant-Voltage (CC/CV)
    Charge/Discharge Control MOSFET: FS8205A
    The input voltage via microUSB or miniUSB: 5V
    Input voltage via solder pads on left-hand side of module: 4.5V~5.5V
    Charging indicator: Red LED, green or blue LED
    Interface: Mini USB or Micro USB
    Charge Complete (Float) Voltage 4.2 V ±1.5%
    Overcharge Detection Voltage 4.3 V ±50 mV
    Overcharge Release Voltage 4.1 V ±50 mV
    Over-Discharge Detection Voltage 2.4 V ±100 mV
    Over-Discharge Release Voltage 3.0 V ±100 mV
    Overcurrent Protection Threshold 3 A
    Overcurrent Cutout Delay 10~20 ms
    Short-Circuit Cutout Delay 5~50 µs
    Trickle Charge (Battery Reconditioning)
    Trickle Charge Threshold Voltage 2.9 V ±0.1 V
    Trickle Charge Current 130 mA ±10 mA

Application:

    Cellular Telephones, PDAs, GPS;
    Charging Docks and Cradles;
    Digital Still Cameras, Portable Devices;
    USB Bus-Powered Chargers,Chargers.

Δείτε σχετικά προϊόντα:
TP4056 Lithium Battery Charger Module 1A
Lithium Battery Charger Board With Protection Module
18650 battery holder