• Maximum Real-time Sampling Rate: 1Msps
• Processor ARM Cortex-M3 processor STM32F103C8
• TFT 2.4-inch color display
  
• Accuracy: 12Bit
• Sampling Buffer Depth: 1024 bytes
• Analog Bandwidth: 0-200KHz
• Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
• Input Impedance: 1MΩ
• Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
• Coupling Modes: DC / AC / GND
• The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
• 1KHz /3.3V square wave test signal source
  
• Supply Voltage: DC 9V
• PCB Size: 117 * 76mm / 4.6 * 3in
• Screen Size: 52 * 40mm / 2 * 1.57in  

Λειτουργίες

Calibration Mode

With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values

Waveform save/recall

Can freeze at any time waveform display (HOLD function).

Triggers and their Modes : Auto Mode Normal & Single

Available rising or falling edge trigger.

Triggers are events that indicate signal voltage acrossing a set level (trigger lever) along a specified direction (trigger slope,rising or falling). Oscilloscope uses triggers as reference points in time for stable waveeform display and measurements.

Το κιτ περιλαμβάνει :

• Πλακέτα παλμογράφου
• 1 probe
  
• Ηλεκτρονικό σχέδιο πλακέτας
• Οδηγίες Λειτουργίας Αγγλικά
  

** H τροφοδοσία δεν πρέπει να ξεπεράσει τα 12 volt, η τάση κανονικής λειτουργίας ειναι 9 volt.